Will the bfg gts 250 OC video card fit in the Apevia X-Cruiser ATX Black Mid-Tower Case? 10 points?

is the video card good for gaming?


will it fit in the case?


im gonna buy a vid card soon and i was wondering if its gonna fit in the pc case





Specifications of the PC





Form Factor: ATX Mid-Tower


Compatible Motherboards: ATX


Micro ATX


Bezel Type: Swing Out


LED Illuminated


Side Panel Type: Clear


Material: Steel


Special Features: Built-in Fan Controller


Vented Side Panel


External 5.25'; Drive Bays: 4


External 3.5'; Drive Bays: 2


Internal 3.5'; Drive Bays: 5


Expansion Slots: 7


Front USB Ports: 2


Front FireWire Ports: 1


Front Audio Ports: 2


80mm Fan Ports: 4


80mm Fans Included: 2


Depth: 19.25';


Width: 7.75';


Height: 17';








for the vid card all i know is that its 9 in long





MUST ANSWER ~~ALL~~ MY QUESTIONS TO GET 10 POINTS!!!Will the bfg gts 250 OC video card fit in the Apevia X-Cruiser ATX Black Mid-Tower Case? 10 points?
Yes it will..





Its good for gaming but only as good as the hardware you use with it speed of processor amount of ram so on and so forth.





9 and a half inches long after power connected. Power plug adds some.. Happy Gaming : )Will the bfg gts 250 OC video card fit in the Apevia X-Cruiser ATX Black Mid-Tower Case? 10 points?
- No it's not good for gaming, It's GREAT for gaming. With the GTS 250 u could play Crysis on Med-Maxed settings no problem let alone the overclocked version of the GTS 250.


- Yes it should be able to fit in your case, but it might be a bit of a tight fit and u might need to rearrange some of your wires to get it to fit.





The real question is, Does your motherboard support it? Remember the GTS 250 oc is a PCI-Express 2.0 x16 Graphics Card, which mean u MUST have at least 1 PCi-Express x16 port on your motherboard for it to work.
I would say it will fit. It might be a tight fit. Dimensions of an ATX board are 12';x9';. If you case is built to fit an ATX board then it should have plenty of room for your Mirco ATX and that card. Just make sure that your board has the slot needed for the card before you buy it. It would terrible if the card fits but your motherboard wont support it.





If all else fails you could always do a little modding with a dremel and a cut off wheel.
1) Yes, that video card is good for gaming.


2) The card will fit.